> [Install settings] > [Zoom]
When the Short Fixed Lens (RS-SL03WF) or the Ultra-wide Zoom Lens (RSSL06UW) is attached and if the projected image does not fit on the screen, you can display the image by electronically reducing its size. This type of zooming reduces overall image dimensions, relative to the center of the image.
Press the [
] button on the remote control to project images at a reduced size, and press the [
] button to enlarge images to full size. Images can be projected at 75 – 100% of the original size.
• D.ZOOM buttons on the remote control cannot be used for this [Zoom] function.
• [Zoom] is not available when the following features are used.
- When [Keystone] is set to [Horizontal-vertical keystone]
- Split-screen mode
• Using [Zoom] after specifying corner adjustment will clear corner adjustment settings and apply the zoom setting. Instead, use [Zoom] before fine-tuning the image position with corner adjustment.
• If images still extend off the screen even after you use [Zoom], you can use corner adjustment to fine-tune the position of image corners, so that images fit on the screen.
• Switching to lenses other than the Short Fixed Lens (RS-SL03WF) or the Ultra-wide Zoom Lens (RS-SL06UW) will reset the setting to 100%.
• The zoom function is not available when [Digital PC], [Analog PC-1], or [Analog PC-2] is selected.
