Turning the Projector Off WUX7500 / WUX6700 / WUX5800

Article ID: ART170567 | Date published: 05/31/2018 | Date last updated: 05/31/2018


Turning the Projector Off  WUX7500 / WUX6700 / WUX5800


Turn the Projector Off
1 Press the POWER button.
2 When this window is displayed, press the POWER button again. 
After you turn the power off, the projector will enter standby mode once it cools down.
• If you want to continue projecting without turning off the power, press a button other than POWER, or else wait until the confirmation message disappears.
• After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off.
• Using the projector for extended periods may shorten the life of the lamp and internal optical components.
• Unplug the projector if it will not be used for an extended period. Note that the [Date and time] setting will be reset, so you will need to set it again.
• In power management mode, the projector may go off automatically after some time

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments