Installation or Positioning for Use WUX7500 / WUX6700 / WUX5800

Article ID: ART170581 | Date published: 06/01/2018 | Date last updated: 06/01/2018


Installation or Positioning for Use  WUX7500 / WUX6700 / WUX5800


Place the projector in front of the screen.

• To avoid keystone distortion, install the projector so that it is at right angles to the
• The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended that lights be turned off, curtains be drawn, and
other steps taken to make the screen easier to see.

Tabletop or Floor Installation (Lower Than the Screen)
To adjust the projection position, use the lens shift function or the adjustable feet.
1 Press the LENS-SHIFT button on the remote control to display the lens shift adjustment window.

Press the LENS button on the projector repeatedly to switch between windows for parameters adjusted by controlling the lens. 
To access the lens shift adjustment window, press the LENS button three times (or four times if you have set [Marginal focus] to [On]).

2 Press the pointer buttons to adjust.
To raise or lower the image, use the buttons on the remote control or projector.
To move the image left or right, use the buttons on the remote control or projector.
To continue moving the image in a specific direction, hold down the corresponding button.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments