Menu Remote control/Side control WUX7500 / WUX6700 / WUX5800
Article ID: ART170615 | Date published: 06/04/2018 | Date last updated: 06/04/2018
 

Description

Menu Remote control/Side control  WUX7500 / WUX6700 / WUX5800

Solution

Remote control/Side control
Specify which operations are available using buttons on the remote control or in the projector’s side controls.



Beep
You can select whether a beep sounds or not when you operate the projector.

The beep will not sound if you mute the projector sound with the MUTE button on the remote control.


Key repeat
Key repeat enables projector or remote control buttons to be held down instead of pressing them repeatedly.



Key lock
Lock the projector or remote (wireless) to prevent operation.


To Unlock Key Lock Function
Turn off the projector and unplug the power plug. Hold down the OK button on the projector and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked.

When you access this setting from the projector’s side controls, [Main unit] is not available. Similarly, when you access the setting from the remote control, [Remote (wireless)] is not available.


IR receiver settings
Select the infrared receiver of the projector.




Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector.

Selecting the Projector Channel
If a wired remote control is used, there is no need to set the remote control channel




Selecting a Channel on the Remote Control After changing the projector channel from the menu, always change the remote control channel accordingly.



[INPUT A-C] button settings
Select input signals to assign to INPUT A-C buttons on the remote control. This enables direct selection of the input signals.



[Fn] button settings
You can select a function to assign to the Fn button on the remote control.

Select a function to assign to the Fn button on the remote control.


Audio in terminal select
Select the terminal for audio input used with various input signals.



HDBaseT signal quality
Display the video signal quality of HDBaseT input. The HDBaseT input signal value received is indicated by a white line.


Do not coil or bundle cables.



Extron XTP
Specify whether to connect to Extron XTP transmitters when connected via HDBaseT.




Serial communication
Select ports used for serial communication. Otherwise, you can refer to this setting to check setting values for the port selected for serial communication.