Scanning Both Sides of a Document Using the ADF (Windows) - TR7520 / TR8520 / TR8620

Article ID: ART171047 | Date published: 07/24/2018 | Date last updated: 09/30/2020
 

Description

This article explains how to scan both sides of a document into a Windows PC with the ADF (Auto Document Feeder) of the PIXMA TR7520 / TR8520 / TR8620.

Solution

To scan both sides of a document using the Automatic Document Feeder (ADF), follow the steps below.

 You must use Document (ADF Manual Duplex) for Select Source in order to scan both sides of a document. 

  1. Place the documents on the ADF.

  2. Start IJ Scan Utility.

  3. Click Settings....

    Click Settings... (outlined in red)

    The Settings dialog box appears.

  4. Click Document Scan.

    Figure: Click Document Scan (outlined in red)

  5. To scan the front side then the back side of each document, select Document (ADF Manual Duplex).

    Figure: Select ADF (Manual Duplex) (outlined in red)

    Auto Duplex scanning is not available on this model.

  6. Set the color mode, document size, and scanning resolution as required.

    Click Document Scan Orientation Settings... to specify the orientation of the documents to be scanned. In the displayed dialog box, you can specify the Orientation and Binding Side. How to place the documents when scanning the back sides depends on the Binding Side.

     Once settings are made in the Settings dialog box, the same settings can be used for scanning from the next time.

     In the Settings dialog box, specify image processing settings such as slant correction, set where to save the scanned images, and more, as needed.

    When setting is completed, click OK.

    Set scanning options as desired

    The IJ Scan Utility main screen appears.

  7. Click Document.

    Click Document (outlined in red)

    Scanning starts.

     To cancel the scan, click Cancel.

    When Document (ADF Manual Duplex) is selected for Select Source, proceed to Step 8.

  8. Follow the on-screen instructions to place the documents.

     The screens for scanning with Orientation set to Portrait are used as examples in the following descriptions.

    When Long edge is Selected for Binding Side in Document Scan Orientation Settings...:

    Place the documents after rotating the output documents 180 degrees.

    Figure: Manual Duplex Scanning prompt

    When Short edge is Selected for Binding Side in Document Scan Orientation Settings...:

    Place the documents without changing the orientation of the output documents.

    Figure: Manual Duplex Scanning prompt

  9. Click OK.

    Scanning starts.

 To cancel the scan, click Cancel.


TR Series Support Pages


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments