|
Getting Started
How to send images from the camera to a computer using Image Transfer Utility 2.
IMPORTANT
- In the following explanation, computer setting procedures are indicated by the
 icon, and camera setting procedures are indicated by the  icon.
Step 1 : Intalling Image Transfer Utility 2
 1. Download the software [ Image Transfer Utility 2 ] from the Canon homepage on to your computer, and proceed to installation.
2. Once the installation is complete, the settings window for [ Image Transfer Utility 2 ] will be displayed, click [ Next ] .
3. [ Preparation ] will be displayed, read the details carefully and click [ Next ] .
4. [ Pairing Setup ] will be displayed. Keep the screen as it is displayed, and move on to the next step.
Step 2 : Connecting the Camera to the Computer
 1. Press the  button.
2. When the [ Nickname ] screen appears, press the  button.
3. Confirm the Nickname (Name of the camera). After confirmation, press the  button.
REFERENCE
- Nicknames are 1 â 8 characters and can be changed later.
4. Press the  /  buttons to choose [ OK ] , press the button.
5. Press the button. Return to the function settings menu.
6. Press the / buttons to choose [  ] , press the  button.
7. Press the / buttons to choose [ 1 ] .
8. Press the  /  buttons to choose [ Wireless communication settings ] , press the button.
9. Press the / buttons to choose [ Wi-Fi settings ] , press the button.
10. Press the / buttons to choose [ Auto send images to computer ] , press the button.
NOTE
If [ Wi-Fi ] settings has [ Disable ] selected, change settings to [ Enable ] .
11. Press the / buttons to choose [ Auto send ] , press the button.
12. Press the / buttons to choose [ Enable ] , press the button.
13. Press the / buttons to choose [ OK ] , press the button.
14. Click [Start] (  ) , and then select [Control Panel].
15. Under [Network and Internet], click [View network status and tasks].
16. Click [Wireless Network Connection].
17. Select the SSID that matches with the one shown in [SSID:], and then press the button. (See the SSID example below).
18. Click [Wireless Properties].
19. Click the [Security] tab.
20. Tick the [Show characters] checkbox.
21. On the [ Password ] screen, press the button.
22. Enter the password displayed in the [Network security key]. (See the password example below).
- For information on how to use the on-screen keyboard, see [Using the On-Screen Keyboard].
- Press the button after the letters have been confirmed, before returning to the previous screen.
23. After the password has been entered, press the / buttons to choose [ OK ] , press the button.
24. Click [Cancel].
25. Click [Close].
26. Close [Network and Sharing Center].
27. Press the / buttons to choose Key index, press the button. (This screen may or may not be displayed)
- Press the / buttons to choose [ OK ] , press the button to go to the next step.
28. Press the / buttons to choose [ Auto setting ] , press the button.
- Press the / buttons to choose [ OK ] , press the button to go to the next step.
29. The computer name will appear. Confirm that the name displayed on the [ Pairing Setup ] screen is the same, press the button.
30. If the camera Nickname is displayed under [ Procedure for this screen ] , select camera and click on [ Pairing ].
31.Once pairing is complete, the [ Setup Complete ] window will appear, click [ OK ] .
32. The [ Waiting ] window will appear for Image Transfer Utility 2. To continue transfering images from the camera, stay on this screen and wait.
NOTE
To save images in a different folder, click on the computer icon to open [ Set Destination Folder ] window.
Step 3 : Setting Up Auto Image Transfer
1. Choose [  ] menu > [Wireless communication settings] > [Wi-Fi settings] > [Auto send images to computer].
2. Choose [ Image sending options ] .
3. In [Image sending options], specify the transfer conditions.
4. Make sure the camera is off.
Step 4 : Sending Images to the Computer
1. Confirm that the Image Transfer Utility 2 window shows [ Waiting ] .
2. The images will automatically transfer to the computer once the camera has been turned on within range of the access point.
3. To confirm the transferred images, click [ Open Destination Folder ] .
- The images will now be automatically transferred to the computer everytime, once the camera is turned on within range of the access point. If auto-transfer does not start, restart the camera.
IMPORTANT
- When using auto image transfer, ensure that the battery pack has sufficient charge. Power saving on the camera is deactivated.
- Any images captured after auto image transfer are not sent to the computer then. They are sent automatically when the camera is restarted.
NOTE
- Auto image transfer to a computer is triggered by camera startup within range of the access point. If auto image transfer does not begin automatically, try restarting the camera.
- To stop sending images automatically, choose [Auto send images to computer] > [Auto send] > [Disable].
- Once Image Transfer Utility 2 is installed, it will continue to work unless the software has been closed.
- Click on
 of the Image Transfer Utility 2 screen, choose [ Quit ] , this will disable auto-transfer even when the camera is turned on. To Enable wireless transfer again, turn on Image Transfer Utility 2.
Using the On-Screen Keyboard
Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you
are using.
 |
Entering characters
Press the / / / buttons or turn the  dial to choose the key of your desired character, and then press the button. |
 |
Moving the cursor
Choose [  ] or [  ] and press the button. |
 |
Switching input modes
Choose [  ] , press the button to switch to capital letters.
Choose [  ] , press the button to switch to numbers and characters. |
 |
Deleting characters
Choose [  ] and press the button. The previous character will be deleted. |
 |
Confirming input
After pressing the  button, press the / buttons to choose [OK] , press the button. |
NOTE
- To return to the previous screen, press the button.
|
