Canon Knowledge Base - Using a USB cable to charge the camera's battery (PowerShot SX740 HS)

Description

Using a USB cable to charge the camera's battery (PowerShot SX740 HS)

Solution

Using a Compact Power Adapter to Charge the Battery

Charge the battery pack by using the supplied battery pack with an optional Compact Power Adapter CA-DC30 Series and Interface Cable IFC-600PCU.

1. Slide the switch

and open the cover

.

2. Insert the battery pack.

Push the battery lock toward and insert the battery pack toward until the lock clicks shut.
If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.

3. Lower the cover

and hold it down as you slide the switch, until it clicks into the closed position

.

4. With the camera turned off, open the cover (

). Hold the smaller plug of the interface cable (sold separately) facing as shown and insert the plug fully into the camera terminal (

).

5. Insert the larger plug of the interface cable into the compact power adapter.

6. Plug the compact power adapter into a power outlet as shown.

7. Charging begins and the USB charge lamp lights up.

The lamp turns off when charging finishes.

8. Remove the compact power adapter from the power outlet and the interface cable from the camera.

IMPORTANT

To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.

When charging another battery pack, always disconnect the interface cable from the camera before replacing the battery pack for charging.

NOTE

If the USB charge lamp is not lit, reconnect the interface cable.

Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use.

The charger can be used in areas with 100 - 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.

Using a Computer to Charge the Battery

You can also charge the battery pack by inserting the larger plug of the interface cable into a computerâs USB terminal in step 5 of "Using a Compact Power Adapter to Charge the Battery". For details about USB connections on the computer, refer to the computer user manual.

We recommend using Interface Cable IFC-600PCU (sold separately).

1. Slide the switch

and open the cover

.

2. Insert the battery pack.

Push the battery lock toward and insert the battery pack toward until the lock clicks shut.
If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.

3. Lower the cover

and hold it down as you slide the switch, until it clicks into the closed position

.

4. With the camera turned off, open the cover (

). Hold the smaller plug of the interface cable (sold separately) facing as shown and insert the plug fully into the camera terminal (

).

5. Connect the larger cable plug to the computer.

For details on computer connections, refer to the computer user manual.

6. Charging now begins, and the indicator on the back of the camera is lit in orange.

However, charging may take longer if you import images on the camera to the computer.
The lamp turns off when charging finishes.

IMPORTANT

Charging may take longer if you import images from the camera to a computer.

Charging stops and the indicator goes off if, after you begin charging as described above, you press the power button to turn the camera off.

With some computers, battery charging may require the memory card to be in the camera. Insert the memory card in the camera before connecting the cable to the computerâs USB port.

ID: 8204036100_EN_1

SIMS Doc Id

8204036100