Easy Wireless Connect Setup - TR4520 (macOS)

Article ID: ART171594 | Date published: 08/30/2018 | Date last updated: 09/19/2019


Mac / Wireless Network



To be able to use your PIXMA TR4500 series printer to print or scan wirelessly on a Mac computer, the printer must first be connected to the wireless network and software drivers and applications installed on the computer.  The instructions /  screenshots  below show the setup program steps when using the Easy Wireless Connect method to connect to the wireless network.

The setup process consists of 2 parts:
  1. Starting Easy Wireless Connect on the printer, and
  2. Downloading and running the setup file to install the drivers and software.

Start Easy Wireless Connect on the printer.

  1. Make sure that the printer is turned on before starting wireless connection setup.

  2. Press and hold the Menu/Wireless connect button for 3 seconds..

  3. When the following screen is displayed, printer preparation is complete

  4. Proceed with setup on the computer.


Download and run the setup file.

Get the file
Read the information taking note of the information concerning warning messages that may appear during setup then click the Download button.

Start setup.
  1. Start setup.  Click Next on the first screen.

  2. Enter your computer User Name and Password then click Install Helper.

  3. Select Start Setup.

  4. Read the network security notice and click Next.

  5. Select the appropriate region and click Next.

  6. Read the license agreement and click Yes to continue.  If you click No, the installation will not proceed.

  7. Select Agree or Do Not Agree to the information request.

  8. Select Yes to confirm the connection method.

  9. Setup continues.

  10. If the following appears, click Allow.

  11. Network Connection is completed.  Click Next.

  12. Click Add Printer.

  13. On the Add screen:
    1. Select the TS series with Bonjour Multifunction listed in the Kind column.
    2. Select AirPrint or Secure AirPrint in the Use: dropdown list.
    3. Click Add and return to the helper tool.

  14. Select Next to continue.

  15. Click Next.

  16. Click Next.

  17. Select any additional software then click Next.

    Any additional software that you selected will be downloaded and installed.  This may take a few minutes.

  18. Click Next.

  19. Select Skip or Register Now.

  20. Select a desktop shortcut preference for the online manual then click Next.

  21. Click Exit.

The printer is now ready for use from your Mac.


TR4520 / TR4522 Support Page

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments