Easy Wireless Connect Setup - TR4520 (Windows)

 

Description

Windows / Wireless Network

 

Solution

To be able to use your TR4500 series printer to print or scan wirelessly on a Windows computer, the printer must first be connected to the Wireless Network and software drivers and applications installed on the computer.  The instructions /  screenshots  below show the setup program steps  when using the Easy Wireless Connect method to connect to the wireless network.

If you are not setting up on a Windows computer, please select the appropriate Operating System link below

 
Setup on Mac OS Setup on Android Device Setup on iOS Device
 
The setup process consists of 2 parts: 
  1. Starting Easy Wireless Connect on the printer, and
     
  2. Downloading and running the setup file to install the drivers and software.
 

Start Easy Wireless Connect on the printer.

 
  1. Make sure that the printer is turned on before starting wireless connection setup.


     
  2. Press and hold the Menu/Wireless connect button for 3 seconds..


  3. When the following screen is displayed, printer preparation is complete


     
  4. Proceed with setup on the computer.


     

     

Download and run the setup file.*
 

Read the information taking note of the information concerning warning messages that may appear during setup then click the Download button.

 Note*

You can also use the Setup CD-ROM that came with your printer to install the software.

 
  1. Run the set up file and click Start Setup.



     Note
  • If you use the Setup CD-ROM that came with your printer, you will see an option that says Use the updated software found on Internet.  If this option is enabled, the installer on the CD-ROM will go out to the internet to get the latest versions of the driver and software for your printer.  If you do not want the installer to do this, remove the check from the box, then click Start Setup.
     
  1. Read the network security notice and click Next.


     
  2. Select the appropriate region and click Next.


     
  3. Read the license agreement. Select Yes to continue or No to cancel.  If you click No, the installation will not proceed.


     
  4. Select Agree or Do Not Agree to the information request.


     
  5. Select Yes to confirm the connection method.


     
  6. Setup continues.


     
  7. Network connection completed, click Next.


     
  8. Driver installation occurs.


     
  9. Information appears.


     
  10. Select Start to begin a test print or Next to continue.


     
  11. Click Next to proceed.  Clicking Abort will take you back to the main screen of the installer.  The printer driver will be installed, but you will not have any additional software for the printer installed.  If you want this printer to be your default printer, place a check in the box for Set as default printer.  If you do not want this printer to be your default printer, remove the check from the box.


     
  12. Select any additional software and click Next.


     
  13. Additional software will be installed.  This may take several minutes.


     
  14. Click Next.


     
  15. Click Exit.


TR4520 / TR4522 Support Page

 
The printer is now ready for use from your Windows PC.

 

Doc ID   ART171596
Updated   02/26/2019

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments