Administrator Password
Depending on the printer you are using, an administrator password is specified at the time of purchase.
The password is either "canon" or the printer serial number if it is specified.
Model whose administrator password is specified as "canon":
MG7500 series, MG6600 series, MG5600 series
MG2900 series, MX490 series, MB5300 series, MB5000 series
MB2300 series, MB2000 series
iB4000 series, PRO-100 (Firmware earlier than 2.021), PRO-10 (Firmware earlier than 2.021)
You will need to print the nozzle check pattern for the PRO-10 or the PRO-100 to see the firmware version.
-
At the time of purchase, the user name "ADMIN" is also specified for the models above.
-
The following character restrictions apply to the password that you change:
-
For security reasons, we recommend you use 8 and more alphanumeric characters.
Model whose serial number is used as the administrator password:
-
For the models other than the above, the printer serial number is used as the administrator password.
How to locate your printer's serial number
-
For the iP110, the password is "canon" if the firmware version is older than 4.020..
-
The following character restrictions apply to the password that you change:
-
For security reasons, we recommend you use 8 and more alphanumeric characters.
Important
-
You can change the password using one of the tools below. (Some tools may not be available depending on the printer you are using.)
-
operation panel of the printer
-
IJ Network Tool
-
printer information screen displayed on some Canon application software
-
IJ Network Device Setup Utility*
* Only for Windows
-
If the password has been changed while you are sharing the printer and you do not know the password, ask the administrator of the printer you are using.
-
Set the password back to the default setting by initializing the printer settings.