Solution |
Print images over a Wi-Fi connection from printers compatible with PictBridge (wireless LAN) technology.
This section describes how to connect the camera directly to a printer via Wi-Fi and to print images.
Preparing the Camera
1. Press the button.
NOTE
- When the following screen appears, press the button.
- To use the nickname displayed, press the button.
- Nicknames are 1 - 8 characters and can be changed later. For more information on using the keyboard, please refer to "On-Screen Keyboard".
- Press the / buttons to choose [OK] and press the button.
Connecting Your Camera and Printer via Wi-Fi
1. Press the / buttons to choose [ ], and then press the button.
2. Choose [Register a device for connection], and then press the button.
3. Check the SSID ( ) and password ( ).
- The SSID ends with _Canon0B.
4. Use the printer to connect to the camera via Wi-Fi.
- In the printer's Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
- In the password field on the printer, enter the password displayed on the camera.
5. Press the / buttons to choose the printer to use and press the button.
- Images on the memory card are displayed after the devices are connected via Wi-Fi.
6. Press the / buttons to choose an image and press the button.
7. Press the / buttons to choose [Print image], and press the button.
8. Press the / buttons to choose [Print], and press the button.
9. [ Start printing ] will be displayed, press the / buttons to choose [ OK ], press the button.
- Printing now begins.
- To print other images, after printing is finished, repeat this procedure from step 6.
NOTE
Wi-Fi signal transmission can be turned off as follows.
Choose [ 1 ] menu > [Wireless communication settings] > [Wi-Fi settings], and in [Wi-Fi], choose [Disable].
Using the On-Screen Keyboard
Use the on-screen keyboard to enter information. Note that the length andãtype of information you can enter varies depending on the function youãare using.
|
Entering characters
Press the / / / buttons or turn the dial to choose the key of your desired character, and then press the button. |
|
Moving the cursor
Choose [ ] or [ ] and press the button. |
|
Switching input modes
Choose [ ] , press the button to switch to capital letters.
Choose [ ] , press the button to switch to numbers and characters. |
|
Deleting characters
Choose [ ] and press the button.
The previous character will be deleted. |
|
Confirming input
After pressing the button, press the / buttons to choose [OK] , press the button. |
NOTE
- To return to the previous screen, press the button.
|