Connecting the Camera To a Computer Using a USB Cable (EOS R)
Article ID: ART171798 | | | Date published: 09/11/2018 | | | Date last updated: 05/03/2019 |
Description
Connecting the Camera To a Computer Using a USB Cable (EOS R)
Solution
Solution |
This section describes how to connect the camera to a computer when importing images to the computer or specifying the camera settings from the computer.
Attention, when connecting via USB (check the USB terminal of your computer) The interface cable that comes with the camera is IFC-100U, of which both terminals of the USB are Type-C. If your computer is not a type-C terminal, then it cannot be used.
Please refer to the computerâs manual for details regarding connection parts.
Use a card reader or Wi-Fi function to transfer photos to the computer. For details, see related information.
Setting Cameraâs [Auto power off] to [Disable] You can prevent the camera from turning off automatically when it is connected to a computer by setting the Auto Power Off to [Disable].
1. Confirm that the camera is not connected to the computer.
2. Set the cameraâs power switch to < ON >.
![]()
3. Press the < MENU > button to display the menu.
![]()
4. Press the < INFO > button to select the [
![]() ![]() ![]()
5. Turn <
![]() ![]() ![]() ![]()
6. Turn <
![]() ![]() ![]() ![]()
7. Turn<
![]() ![]()
8. Turn<
![]() ![]()
9. Press the < MENU > button to turn off the menu screen.
10. Set the cameraâs power switch to < OFF >.
How to Connect the Camera To a Computer Using a USB Cable Use the provided interface cable or one from Canon. When connecting the interface cable, use the provided cable protector.
Using the cable protector helps prevent accidental disconnection and terminal damage.
![]() ![]() ![]()
This cable is included with your camera.
![]()
1. Open the terminal cover.
![]() ![]() ![]()
2. Remove the cable protector clamp.
A: Clamp
![]()
3. Attach the cable protector to the interface terminal area of the camera.
B: Cable protector
![]()
4. Run the cable through the clamp as shown in
![]() ![]() ![]() ![]()
5. Next, attach the clamp in the location shown in the figure below.
![]() ![]() ![]()
6. Plug the cord into the digital terminal.
C: Interface cable
![]() ![]() ![]()
7. Connect the cordâs plug to the computerâs USB terminal.
![]()
8. Set the power switch to <ON>.
9. Before disconnecting the cable, turn off the camera. Hold the plug (not the cord) to pull out the cable.
|
Related Info |
Using a Card Reader or a Card Slot on a Computer to Download Images (Interchangeable-lens Digital Cameras)
Using EOS Utility 3.x to Send Images to a Computer (Wi-Fi Function) (EOS R)
|
ID: 8204189000_EN_4
|
SIMS Doc Id
8204189000