Basic Copy Operations This section describes the basic operation procedure used to copy an original.
1. Place the original(s).
2. Display the <Copy> screen.
Touch Panel Model
Select <Copy> in the Home screen.
5 Lines LCD Model
Press (COPY/SCAN).
3. Enter the number of copies using the numeric keys.
- If you have entered an incorrect value, use to clear it.
4. Specify the copy settings as necessary.
NOTE
- For details, see the "User's Guide" from the Canon website (https://oip.manual.canon).
5. Press .
Copying starts.
- If you want to cancel, select <Cancel> <Yes>.
6-A. When placing originals in the feeder in step 1
The original is automatically scanned.
6-B. When placing originals on the platen glass in step 1
If you have set 2-sided copying, N on 1 copying, or collating, a screen prompting you to load the next original is displayed.
6-B-1. Select the document size.
- Only displayed when 2-sided copying is set.
6-B-2. Place the next original on the platen glass, and press .
- You can also specify <Density> and <Original Type> separately for each original.
- Repeat this step until you finish scanning the entire original.
6-B-3. Select <Start Copy>/<Start Copying>.
NOTE
- When the <Size/Settings Mismatch> or <The memory is full. Scanning will be canceled. Do you want to print?>/<The memory is full. Scanning will be canceled. Print?> message is shown in the display.
IMPORTANT
When copying originals with text or images that extend to the edges of the page
- The edges of the original might not be copied. For more information about the scan margins, see the "User's Guide" from the Canon website (https://oip.manual.canon).
REFERENCE
- If you always want to make copies with the same settings, see the "User's Guide" from the Canon website (https://oip.manual.canon).
Selecting the Type of Original for Copying You can select the optical image quality for the copy depending on the original type, such as text-only documents, documents with charts and graphs, or magazine photos.
Touch Panel Model
<Copy> <Original Type> Select the original type
5 Lines LCD Model
<Text> |
Suitable when copying originals that only contain text. |
<Text/Photo (High Speed)> |
Suitable when copying originals that contain both text and photos. Priority is given to speed over image quality. |
<Text/Photo> |
Suitable when copying originals that contain both text and photos. |
<Photo> |
Suitable when copying originals that contain printed photos, such as magazines or pamphlets. |
NOTE
- If <Text/Photo (High Speed)>, <Text/Photo>, or <Photo> is selected while <Density> is set to <Auto Density>, density setting changes to Manual Density.
Canceling Copies If you want to cancel copying immediately after pressing , select <Cancel> on the screen or press on the operation panel. You can also cancel copying after checking the copy status.
Select <Cancel> on the Screen That is Displayed While Copying
Press to Cancel
If the Screen Displays a List of Documents When is Pressed
Originals have been scanned and are waiting to be printed. Select a copy document to be canceled, and select <Yes>.
Check the copy job status before canceling
|