Loading Originals on the Platen Glass - TS3120 / TS3122
Article ID: ART172089 |
| |
Date published: 10/03/2018 |
| |
Date last updated: 04/08/2019 |
Description
This article explains how to load an original document or photo on the platen glass of your PIXMA TS3120 / TS3122.
Solution
-
Load an original on the platen glass.
-
Open the document cover.
-
Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass.
Align the corner of the original with the alignment mark .
Important
-
Be sure to observe the following when loading the original on the platen glass. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
- Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
- Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original.
-
The printer cannot scan the striped area (A) (0.04 inches (1 mm) from the edges of the platen glass).
-
Close the document cover gently.
Important
- After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan.
PIXMA TS3120 / TS3122 Page