My scanner is not reading the MICR print correctly.

Article ID: ART172131

Date published: 10/05/2018

Date last updated: 10/05/2018

If the magnetic heads are dirty, then MICR characters cannot be scanned correctly.

Periodically, clean the magnetic heads with a commercially available audio head cleaner.

Hood your finger around the open lever and open the maintenance cover.
Use a commercially available audio head cleaner to clean the magnetic head.
The magnetic head is located in the position shown in the diagram below.
Gently close the maintenance cover until it clicks into place.

Rate this Article

Was this article helpful? Yes, This document is helpful No, This document needs a clearer explanation

Please provide your comments

Ask a Question

Models related to this article