Wi-Fi
When Wi-Fi is selected in the LAN settings screen, the network settings information of the printer when it is connected by Wi-Fi appears in the Wi-Fi setting list screen.
To print the LAN settings, select Print details in the LAN settings screen and select Yes.
Important
The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)
Items |
Setting |
Connection |
Enabled (connected)/Enabled (disconnected)/Disabled |
Network name (SSID) |
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters) |
Wi-Fi security |
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES) |
Signal strength (%) |
XXX |
IPv4 address |
XXX. XXX. XXX. XXX (12 characters) |
IPv4 subnet mask |
XXX. XXX. XXX. XXX (12 characters) |
IPv4 default gateway |
XXX. XXX. XXX. XXX (12 characters) |
IPv6 link-local address |
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters) |
MAC address (Wi-Fi) |
XXX. XXX. XXX. XXX (12 characters) |
Printer name |
XXXXXXXXXXXXXXX (up to 15 characters) |
Bonjour service name |
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters) |
("XX" represents alphanumeric characters.)
If Settings is selected in the Wi-Fi setting list screen, the following settings are available.
Wireless Direct
When Wireless Direct is selected in the LAN settings screen, the network settings information of the printer when it is connected by the Wireless Direct appears in the Wireless Direct setting list screen.
To print the LAN settings, select Print details in the LAN settings screen and select Yes.
Important
The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)
Note
Items |
Setting |
Connection |
Enabled (connected)/Disabled |
Network (SSID)/device name |
DIRECT-XXXX-TS6200series |
Password |
XXXXXXXXXX (10 characters) |
Wi-Fi security |
WPA2-PSK(AES) |
No. of devices connected now |
XX/XX |
IPv4 address |
XXX. XXX. XXX. XXX (12 characters) |
IPv4 subnet mask |
XXX. XXX. XXX. XXX (12 characters) |
IPv4 default gateway |
XXX. XXX. XXX. XXX (12 characters) |
IPv6 link-local address |
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters) |
MAC address (Wi-Fi) |
XXX. XXX. XXX. XXX (12 characters) |
Printer name |
XXXXXXXXXXXXXXX (up to 15 characters) |
Bonjour service name |
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters) |
("XX" represents alphanumeric characters.)
If Settings is selected in the Wireless Direct setting list screen, the following settings are available.
-
Enable/disable Wireless Direct
Enables/disables Wireless Direct.
-
Change SSID/device name
Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for Wireless Direct.
-
Change password
Changes the password for Wireless Direct.
-
Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.
-
Advanced setup
For details on each setting item:
Advanced setup
-
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
-
TCP/IP settings
Performs IPv4 or IPv6 setting.
-
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
-
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
-
Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
-
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD. To transfer the scanned data, press the Color button.
Note
-
Timeout setting
Specifies the timeout length.
-
Bonjour settings
Setting items for LAN using Bonjour for macOS.
-
LPR protocol setting
Enables/disables the LPR setting.
-
RAW protocol
Enables/disables RAW printing.
-
LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer to detect printer's IP address from the printer name without a DNS server.
-
IPP settings
Selecting Enable allows you to print via the network with the IPP protocol.
-
PictBridge communication
Setting items for printing from a PictBridge (Wi-Fi) compliant device.
-
Enable/disable communication
Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device.
-
Timeout setting
Specifies the timeout length.
-
IPsec settings
Selecting Enable allows you to specify the IPsec security.
TS6220 Support Page