Changing the Shutter Speed Value XF705

Article ID: ART172623 | Date published: 12/17/2018 | Date last updated: 12/17/2018


Changing the Shutter Speed Value  XF705


Changing the Shutter Speed Value
When the shutter speed mode is set to a mode other than OFF or automatic, you can set the shutter speed manually as a speed value, angle or clear scan frequency.
You can also perform this function remotely using Browser Remote on a connected network device.

1 To change the shutter speed increment for Speed mode, select [Shutter Increment].

2 Select [Normal] or [Fine] and then press SET.
  • If you select [Fine], you can adjust the shutter speed in increments of 1/256 stop.
3 After closing the menu, select a shutter speed mode other than OFF or Automatic (A53).
  • The camera will enter direct setting mode with the shutter speed value highlighted in orange.
  • Alternatively, you can press the FUNC button repeatedly to highlight the current shutter speed value without changing the current shutter speed mode.
4 Adjust the shutter speed, angle value or clear scan frequency using the direct setting mode.
  • For details refer to Using the Direct Setting Mode
  • The selected shutter speed will appear at the bottom of the screen.

• Closing down the aperture when recording under bright conditions may cause the picture to appear soft or out of focus. To avoid the loss of sharpness due to diffraction, use a denser ND filter a faster shutter speed, or open up the aperture.
• When the gain and aperture are set to manual and the shutter speed mode is set to a mode other than OFF or automatic, the exposure bar will appear at the bottom of the screen.
• When the camcorder is set to full auto mode or you activate infrared recording, the shutter speed mode will be set to automatic. If you activate both slow motion recording and infrared recording at the same time, the shutter speed will be set to 1/120 (59.94 Hz recordings) or automatically within the range 1/120 – 1/100 (50.00 Hz recordings).
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can change the shutter speed mode with the remote controller’s SHUTTER SELECT button and the shutter speed value with the remote controller’s SHUTTER Í/Î buttons, regardless of the position of the camcorder's SHUTTER switch.
• If you set an assignable button to [Shutter], you can press the button to enter the direct setting mode with the shutter speed highlighted

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments