Colors Bars/Audio Reference Signal XF705

Article ID: ART172687 | Date published: 12/18/2018 | Date last updated: 12/18/2018


Colors Bars/Audio Reference Signal  XF705


Colors Bars/Audio Reference Signal
You can have the camcorder generate color bars and a 1 kHz audio reference signal and output them from the SDI terminal, HDMI OUT terminal and × (headphone) terminal*.
* Audio reference signal only.

Operating modes:

Color Bars
The camcorder offers 3 types of color bars (SMPTE, EBU or ARIB).
1 Select [Color Bar Type].

2 Select the type of color bars and then press SET.
3 To activate the color bars, select [Color Bars].

4 Select [On] and then press SET.
  • The selected color bars appear on the screen and will be recorded when you press the REC button.
  • Turning off the camcorder or changing the operating mode to mode will deactivate the color bars.
  • You cannot change the type of color bars while recording or when pre-recording is activated.
  • You cannot turn the color bars on and off while recording.
  • If you set an assignable button to [Color Bars], you can press the button to turn the color bars on/off.

Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 Select [1 kHz Tone].

2 Select the desired level and then press SET.
• You can select one of three audio levels (–12 dB, –18 dB, –20 dB) or [Off] to turn off the signal.
• The reference signal will be output at the selected level when you display the color bars, and will be recorded when you press the REC button.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments