Using Metadata XF705
Article ID: ART172692 | Date published: 12/18/2018 | Date last updated: 12/18/2018
 

Description

Using Metadata  XF705

Solution

Using Metadata
The camcorder automatically adds metadata to the recorded clips. You can use Canon XF Utility to check and search for specific metadata. You can also create and transfer a user memo remotely using the Browser Remote application


Operating modes:

Setting a User Memo Created with Canon XF Utility
Before you can add a user memo, you must first install Canon XF Utility. Next, create the user memo and save it to an SD card. Once you insert the card in the camcorder and select the user memo, it will be added to clips you record after that.

1 Use Canon XF Utility to save a user memo to an SD card.
  • For details, refer to Managing User Memo Profiles in the Canon XF Utility Instruction Manual.
2 Insert the card into the camcorder’s SD card slot 3.
3 Select the user memo [Setting].

4 Select [SD Card] and then press SET.
5 Select [User Memo].

6 Select the file name of the desired user memo and then press SET.
  • The Q icon appears on the right of the screen.
  • Select [Off] to record clips without a user memo.
NOTES
  • After you set a user memo, do not remove the SD card while you are recording. If the card is removed, the user memo will not be added to clips.
  • You must set the user memo before you start recording for it to be added to the clips. You cannot change the user memo already added to a clip using the camcorder but you can do so with Canon XF Utility.
  • When the optional GP-E2 GPS Receiver is connected to the camcorder, the user memo information will not be recorded, even if you have selected a user memo file from the SD card.