Reviewing a Recording
If you set an assignable button to [Review Recording] in advance, you can review all or part of the last clip recorded even with the camcorder set to mode.

Operating Modes:

1 Set an assignable button to [Review Recording] in advance 
2 To set the review length, select [Review Recording].

3 Select the desired option and then press SET.
4 After you finish recording a clip, press the assignable button.

• The last clip that was recorded is played back for the selected duration. [ REVIEW] appears at the top of the screen.
• While the clip is reviewed, there will be no sound from the built-in speaker but the audio will be output from the  (headphone) terminal, HDMI OUT terminal and SDI terminal.
• You can use the joystick to jump back/forward within the clip
• Press the CANCEL button to stop reviewing the clip and return the camcorder to record standby mode.
• After the clip finishes playing back, the camcorder returns to record standby mode.

Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.

NOTES
• If the camcorder switched SD cards during a recording, the camcorder will play back the clip on the card most recently recorded on.