Clip Operations
Besides playing back a clip, you can perform other operations from the clip menu, such as deleting a clip or displaying clip information. Refer to the following table for available functions and refer to the following pages for more details of the functions.
Operating modes:
.png)
Using the Clip Menu
1 Select a clip and then press SET.
- The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press SET.
- The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
- Press the CANCEL button instead to return to the clip index screen.
IMPORTANT
- Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• Make sure the LOCK switch on the SD card is not set to prevent writing
Displaying Clip Information
Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button to return to the clip index screen.
1 Thumbnail of the selected clip
2 Thumbnail of the next clip
3 Thumbnail of the previous clip
4 SD card (the one currently selected appears in white)
5 Clip geotagged with GPS information
6 Slow motion recording1
7 Clip number / Total number of clips
8 Recording date and time
9 Clip file name |
10 Compression, bit rate and resolution
11 Frame rate2
12 Shot mark and  mark /  mark
13 Custom picture file embedded
14 Color sampling
15 Clip’s start time code
16 Clip’s end time code
17 Clip duration |
 |
1 XF-HEVC clips only.
2 For clips recorded using slow motion recording, the shooting frame rate and playback frame rate will both be displayed.
