Network Functions XF705

Article ID: ART172752 | Date published: 12/19/2018 | Date last updated: 12/19/2018


Network Functions  XF705


About the Network Functions
You can connect the camcorder to a wireless network or a compatible network device using Wi-Fi or to a wired network using an Ethernet cable

Before using the network functions
  • The instructions in this chapter assume you already have a correctly configured and working network, network device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you plan to use.
  • Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet) and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
  • Data transmitted over networks is not encrypted.
  • Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
  • Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Also, the camcorder is shipped with default passwords so you can test the network functions as soon as possible.
  • Changing the initial settings is recommended. Be aware of any data security risks involved.
• About the Wi-Fi antenna: When using the camcorder’s Wi-Fi functions, do not cover the Wi-Fi antenna with your hand or other object. Covering it may interfere with wireless signals.
• Do not open the card slot covers while using network functions.
• Do not place cables connected to the SDI terminal or HDMI OUT terminal near the Wi-Fi antenna. Doing so may negatively affect the wireless communication over Wi-Fi.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments