Connecting to a Wired (Ethernet) Network XF705

Article ID: ART172760 | Date published: 12/19/2018 | Date last updated: 12/19/2018


Connecting to a Wired (Ethernet) Network  XF705


Connecting to a Wired (Ethernet) Network
Connect the camcorder to a router or other device connected to a wired (Ethernet) network using a commercially available Ethernet cable. Use Category 5e or better, shielded twisted pair (STP) Ethernet cables compatible with Gigabit Ethernet (1000BASE-T) and with good shielding capability.

1 Connect a commercially available Ethernet cable to the terminal on the camcorder and an Ethernet port on a network device.
2 Select [Connection Settings].

3 Select the desired network configuration profile and then select [Ethernet].
Network configuration profile ([1:] to [4:]) [Edit]  [Ethernet]
  • You can save up to 4 network configuration profiles in the camcorder. Push the joystick up/down to select the desired profile.
4 Continue with the procedure to configure the IP address assignment

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments