Selecting a Network Connection
You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already be automatically selected so follow this procedure to select a different configuration profile.
1 Select [Connection Settings].

2 Select the desired configuration number and then press SET.
3 Select [OK] and then press SET.

Checking the Network’s Status
After activating a network function, the camcorder will connect to the network that was configured in advance.
The icons displayed on the screen will indicate the type of network selected and the connection status.



 In yellow – the camcorder is connecting to or disconnecting from the network. In white – the network function can be used.
 In yellow – starting the camcorder’s access point. In white – the camcorder’s access point is ready. Connect the Wi-Fi enabled device to the camcorder.
In yellow – the camcorder is connecting to or disconnecting from the network. In white – the network function can be used.
The (Ethernet) indicator next to the terminal will flash or illuminate as follows*: Flashing in
green – connecting to the network or streaming video (IP streaming only); illuminated in green –
FTP transfer active; flashing in red – network error.
: Browser Remote 
: IP streaming 
: FTP transfer 
* You can also set to disable the indicator.