Connecting the Main Unit to Input Devices
Article ID: ART172788 | Date published: 12/20/2018 | Date last updated: 01/11/2019
 

Description

Connecting the Main Unit to Input Devices

Solution

The video display has SDI and HDMI input terminals to connect to input devices.

 CAUTION
  • Check that the power of the video display and input devices is switched off before connecting.
SDI input signals
  Input signal Input terminal  
Quad Link
(Square Division)
V1710
6G/3G/HD-SDI
V1711
12G/6G/3G/
HD-SDI
Top left, Mapping signal Input A Single input system
Top right, Mapping signal Input B
Bottom left, Mapping signal Input C
Bottom right, Mapping signal Input D
Quad Link
(2 Sample Interleave)
3G-SDI Link 1 Input A Single input system
Link 2 Input B
Link 3 Input C
Link 4 Input D
Dual Link1 6G/3G-SDI Link 1 Input A Two input systems
Link 2 Input B
Link 1 Input C
Link 2 Input D
Single Link V1710
6G/3G/HD/SD-SDI
V1711
12G/6G/3G/HD/
SD-SDI
--- Input A/Input B/
Input C/Input D
Four input systems
1 The signals are automatically switched when [Image Division] is set to [Automatic].

Reference
  • V1710  The connection is tested using 4VS03A-5C BNC cables (multi) manufactured by Canare Electric Co.
    V1711 The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.
  • When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.
  • Each input terminal is compatible with through output. When signals are input from Input A, connect the cable to the SDI (OUT) terminal of Input A.

HDMI input signal

CAUTION
  • Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable is used, the video display may not work normally, for example a video becomes choppy or nothing is displayed.
  •