Remote Control Operating Range REALis 4K6020Z / 4K5020Z

Article ID: ART172829 | Date published: 12/21/2018 | Date last updated: 12/21/2018


Remote Control Operating Range  REALis 4K6020Z / 4K5020Z


Remote Control Operating Range
The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it.
  • Use the remote control no further than approximately 8 m (26.3') from the projector.
  • Use the remote control within an angle of 25° in any direction from directly in front of the infrared remote receiver.
  • The remote control may be inoperative if there is an obstacle between the remote control and the projector or the infrared remote receiver on the projector is exposed to direct sunlight or strong light of lighting equipment.
  • When you use 2 or more projectors at the same time, change the channel settings to prevent the 2 remote controls from interfering with each other

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments