Turn the Projector Off REALis 4K6020Z / 4K5020Z
| Article ID: ART172833 |
| |
Date published: 12/21/2018 |
| |
Date last updated: 12/21/2018 |
Description
Turn the Projector Off REALis 4K6020Z / 4K5020Z
Solution
Turn the Projector Off
1 Press the POWER button.
2 When this window is displayed, press the POWER button again.
After you turn the projector off, projection stops, the [STANDBY] indicator flashes in red, and the projector starts cooling down. After cooling down, the projector enters standby mode. In standby mode,
the [STANDBY] indicator remains lit instead of flashing. |
 |
- If you want to continue projecting without turning off the power, press a button other than POWER, or else wait until the confirmation message disappears.
- The projector cannot be turned on while cooling down.
- Using the projector for extended periods may shorten the life of the internal optical components.
- Unplug the projector if it will not be used for an extended period. Note that the [Date and time] setting will be reset, so you will need to set it again.
- In power management mode, the projector may go off automatically after some time