Temporarily Blacking Out an Image
Projection can be temporarily blanked after a presentation, or to divert the audience’s attention away from the screen.

Press the BLANK button on the remote control to black out the image. Press the BLANK button again to show the image. You can set the screen state while blacking out the image in the menu

Freezing the Picture
Projection can be temporarily frozen during computer operations that would be distracting, or to pause playback of video or animation.

Press the FREEZE button on the remote control to freeze the moving image. The following icon appears. Press the FREEZE button again to return to the original display. • It is also cancelled when the input signal is terminated.

Projecting a Test Pattern from the Menu
Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Test pattern” or “Adjustment Using a Test Pattern”

Specifying Power-Saving Settings
Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing each function.

• Light source mode - Conserve energy by selecting a mode that is less bright.
• Standby power settings  - Conserves energy in standby mode by disabling some network functions.
• Power management mode - Automatically turns off the light source or the power after a certain period if the projector is idle without an input signal.
• Power management duration - Specify the period after which the light source or projector should go off automatically if left idle without an input signal when [Power management mode] is set to [Light source off] or [Standby].