Menu Description Light source mode REALis 4K6020Z / 4K5020Z

Article ID: ART172870 | Date published: 12/24/2018 | Date last updated: 12/24/2018


Menu Description Light source mode  REALis 4K6020Z / 4K5020Z


Light source mode
> [Image adjustment] > [Light source mode]
Reducing projection brightness reduces power consumption and fan noise
Optionl Function
Normal Projects images at full brightness.
Quiet 1 Select to reduce brightness, or when quiet projection is required.
Quiet 2 Reduces brightness and noise further.
Adjust Fine-tune brightness. Fan speed is adjusted automatically based on your brightness adjustments.
Use the buttons to adjust the brightness on the Brightness level adjustment screen that appears

[Brightness level] is shown when the light source mode is set to [Adjust].

[Light source mode] is displayed when the operating mode is [Normal]. If the operating mode is not set to [Normal], [Brightness level] appears instead of [Light source mode].

Brightness level
> [Image adjustment] > [Brightness level]
Control the laser diode to adjust the projection brightness. Use the  buttons to adjust the brightness

[Brightness level] appears instead of [Light source mode] when the operating mode is not set to [Normal].

> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.

• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current projection is reset

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments