Menu Description Light source mode REALis 4K6020Z / 4K5020Z
Article ID: ART172870 | Date published: 12/24/2018 | Date last updated: 12/24/2018
 

Description

Menu Description Light source mode  REALis 4K6020Z / 4K5020Z

Solution

Light source mode
> [Image adjustment] > [Light source mode]
Reducing projection brightness reduces power consumption and fan noise
Optionl Function
Normal Projects images at full brightness.
Quiet 1 Select to reduce brightness, or when quiet projection is required.
Quiet 2 Reduces brightness and noise further.
Adjust Fine-tune brightness. Fan speed is adjusted automatically based on your brightness adjustments.
Use the buttons to adjust the brightness on the Brightness level adjustment screen that appears

[Brightness level] is shown when the light source mode is set to [Adjust].

[Light source mode] is displayed when the operating mode is [Normal]. If the operating mode is not set to [Normal], [Brightness level] appears instead of [Light source mode].


Brightness level
> [Image adjustment] > [Brightness level]
Control the laser diode to adjust the projection brightness. Use the  buttons to adjust the brightness

[Brightness level] appears instead of [Light source mode] when the operating mode is not set to [Normal].


Reset
> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.


• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current projection is reset