Barcode Types
Code |
Number of digits |
Checksum |
EAN/JAN |
8 or 13 |
Modulus 10, Weight 3 |
Codabar |
3 to 32 (including Start/Stop characters) |
Modulus 16, 7 DR |
Code 39 |
3 to 32 (including Start/Stop characters
(Standard ASCII or Full ASCII) |
Modulus 43 |
ITF |
2 to 32 (even numbers of digits only) |
Modulus 10,Weight 3 |
Code 128 |
1 to 32 (valid data only) |
Modulus 103 |
UPC-A |
13 |
Modulus 10, Weight 3 |
UPC-E |
8 |
Modulus 10, Weight 3 |
NOTE: EAN, UPC-A and UPC-E add-ons supported
1D Barcode Recognition Conditions
Item |
Condition |
Printed Side |
Front or back (or both, but at reduced speed) |
Orientation |
Perpendicular (0 degrees) or parallel (90 degrees) to feeding direction
Reading direction should be specified beforehand
Note: Speed is slow when both directions are specified. |
Size |
Line Width |
0.3 to 1mm (0.01" to 0.04")
When module exceeds 0.508 mm (0.02"), Code 128, UPC-A, UPC-E and EAN/JAN detect incorrectly |
Code Width |
105 mm or less (4.1") (including quiet zone) |
Bar Height |
At least 10 mm (0.4") |
Margins |
At least one character at each end |
Slew |
Within +/- 3 degrees |
Element Ratio |
2.2 to 3.0 |
PCS Value |
At least 0.60 (with at least 755 white reflectance) |
Position |
Feed Direction |
At least 2 mm (0.1") from the edge of the page |
Perpendicular to Feed Direction |
At least 5 mm (0.2") from the edge of the page |
Quantity |
Up to for per page |
Spacing |
At least 5 mm (0.2") |
Conditions |
No background or overlapping barcodes |
* Reading accuracy is affected by the print quality of the 1D barcode. Increase the scan resolution if reading is unreliable.
2D Barcode Recognition Conditions
Item |
Specifications |
Printed Side |
Front or back (or both) |
Size |
Dimensions |
Minimum cell (module) size (width and length)
100 dpi: 0.3 mm to 3 mm (0.0118" to 0.1181")
200 dpi: 0.1 mm to 3 mm (0.0039" to 0.1181")
300 dpi: 0.09 mm to 3 mm (0.00354" to 0.1181") |
Margins Quiet Zone |
4 cells (modules) or more |
PCS value |
At least 0.60 (with at least 75% white reflectance) |
Position |
Feed Direction |
At least 2 mm (0.1") from the edge of the page |
Perpendicular to Feed Direction |
At least 5 mm (0.2") from the edge of the page |
Quantity |
Up to four per page |
Spacing |
At least 5 mm (0.2") and 8 cells (modules) |
Conditions |
No background or covering of 2D code |
*Reading accuracy is affected by the print quality of 2D code. Increase the scan resolution if reading is unreliable.