System settings
Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations.

Menu screen when the input signal is HDMI-1


User screen settings
> [System settings] > [User screen settings] Capture a logo and specify logo display settings




Menu position
Reposition menu display.
Choose from upper left, upper right, center, lower left, or lower right.
Only [Center] is available when edge blending is used. Other display positions are grayed out and not available



The following display times are also changed.


Menu rotation
Rotate menu display. When projecting in portrait orientation, for example, with the projector installed at a 90° angle, specify the orientation of projected menus to align them with the top or bottom of projected images.

• To determine the orientation of menu rotation, projector orientation is detected immediately after startup or when this setting is switched to [Auto].
• Menus are not rotated automatically in response to changes in projector orientation during projection

Guide
Shows the guide screen


The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK] or [FREEZE] mode 
• When positional lock is set to [On] and buttons locked by this feature are
pressed.

Show input status
Specify whether signal status is shown when there is no signal or when you are completing signal settings.


Air filter warning display
Shows a warning to replace the air filter when replacement is required.

Setting [Air filter warning display] to [Off] will disable display of the warning to replace the air filter. We recommend checking the air filter counter occasionally to know when to replace the filter.

Overheat warning display
Specify whether the icon warning of high temperature is shown when the internal temperature is high and the projector may overheat.