Menu Description Firmware REALis 4K6020Z / 4K5020Z

Article ID: ART172883 | Date published: 12/24/2018 | Date last updated: 12/24/2018


Menu Description Firmware REALis 4K6020Z / 4K5020Z


Update the projector firmware.
Check the version indicated before updating the firmware

Update the projector firmware as follows.
1. Download updated firmware from the Canon website and store it at the root directory on a
USB flash drive.
2. Insert the USB flash drive in the USB port.
3. Follow the instructions shown to complete the update process.
  • Firmware versions shown here are for illustration only and differ from actual versions.
  • In some cases, it may not be possible to download updates. For details, contact the Canon Customer Support Center.
  • Firmware updating takes a few minutes. During the update, the LED indicator will flash in red. Do not turn off the projector while the LED is flashing. After the update, the projector will automatically turn itself off and enter standby mode.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments