Menu Description Network settings REALis 4K6020Z / 4K5020Z

Article ID: ART172885 | Date published: 12/24/2018 | Date last updated: 12/26/2018


Menu Description Network settings    REALis 4K6020Z / 4K5020Z


Network settings
Settings described in this section apply to wired and wireless network connections, setting a network password, and other aspects of networked projection

Menu screen when the input signal is HDMI-1

Menus that are not available are grayed out or hidden.
* Only available for wired connections.

Network settings lock
> [Network settings] > [Network settings lock]
You can lock/unlock the network settings so that they cannot be changed.

• Forcibly canceling the network lock
Press these buttons in the following order to cancel the lock: 
[OK]. This operation resets the network password to
• Setting [Network password setting] to [Off] leaves network settings unlocked.

Network password setting
> [Network settings] > [Network password setting]
You can set whether or not a password is required in order to change the projector network settings.

Register network password
> [Network settings] > [Register network password]
Use the buttons or number buttons on the remote control to enter the projector network password.

Network (wired/wireless)
> [Network settings] > [Network (wired/wireless)]
Enable or disable wired or wireless network connectivity and the mode of operation.
Specifying [Off] can save energy.

Notes When Connected Wirelessly
A message is displayed at the initial startup in PJ AP mode (P66) requesting that you
check security key settings.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments