Network settings
Settings described in this section apply to wired and wireless network connections, setting a network password, and other aspects of networked projection


Menu screen when the input signal is HDMI-1


Menus that are not available are grayed out or hidden.
* Only available for wired connections.

Network settings lock
> [Network settings] > [Network settings lock]
You can lock/unlock the network settings so that they cannot be changed.

• Forcibly canceling the network lock
Press these buttons in the following order to cancel the lock: 
[OK]. This operation resets the network password to
• Setting [Network password setting] to [Off] leaves network settings unlocked.

Network password setting
> [Network settings] > [Network password setting]
You can set whether or not a password is required in order to change the projector network settings.


Register network password
> [Network settings] > [Register network password]
Use the buttons or number buttons on the remote control to enter the projector network password.


Network (wired/wireless)
> [Network settings] > [Network (wired/wireless)]
Enable or disable wired or wireless network connectivity and the mode of operation.
Specifying [Off] can save energy.


Notes When Connected Wirelessly
A message is displayed at the initial startup in PJ AP mode (P66) requesting that you
check security key settings.