Basic Wireless Network Settings [Wireless] REALis 4K6020Z / 4K5020Z

Article ID: ART172897 | Date published: 12/26/2018 | Date last updated: 12/26/2018


Basic Wireless Network Settings [Wireless]    REALis 4K6020Z / 4K5020Z


Basic Wireless Network Settings [Wireless]
From [Wireless] on the settings screen, you can complete basic network information for wireless connections. For the setting procedure, see “Network Setting” 

• If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to the network. If the network subnet mask was changed, select [Subnet mask] in the above screen and set the new subnet mask.
• IPv6 connectivity is not available in PJ AP mode (P66). [IPv6 address] is grayed out.
• For partial SSID editing when connected in PJ AP wireless LAN mode (P66), you can edit the portion between PJ- and _Canon0D. Enter 1-byte alphanumeric characters, including hyphens and underscores (1 – 15 characters).

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments