Adjusting the projected image Adjusting the projection angle LX-HM502Z
Article ID: ART172936 | Date published: 12/27/2018 | Date last updated: 12/27/2018
 

Description

Adjusting the projected image Adjusting the projection angle LX-HM502Z

Solution

 
Adjusting the projection angle
The projector is equipped with 4 adjuster feet.
These adjusters change the image height and projection angle. To adjust the projector, screw the adjuster foot to fine tune the horizontal angle.To retract the foot, screw the rear adjuster foot in a reverse direction. 
If the projector is not placed on a flat surface or the screen and the projector are not parallel to
each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" 

Do not look into the lens while the light source is on. The strong light from the light source may cause damage to your eyes.