Switching input signal
The projector can be connected to multiple devices at
the same time. However, it can only display one full
screen at a time. When starting up, the projector
automatically searches for the available signals.
Be sure the SYSTEM SETUP: BASIC > Auto Input
Search menu is On if you want the projector to
automatically search for the signals.
To select the source:
1. Press INPUT. A source selection bar appears.
2. Press  until your desired signal is selected and
press OK.
Once detected, the selected source information will
appear at the corner of the screen for seconds. If
there is multiple equipment connected to the
projector, repeat steps 1-2 to search for another signal. |
 |
The brightness level of the projected image will change accordingly when you switch between different input signals
