Ask a Question

Light source information Getting to know the light source hour LX-MH502Z

Article ID: ART172949 | Date published: 12/28/2018 | Date last updated: 12/28/2018
 

Description

Light source information Getting to know the light source hour  LX-MH502Z

Solution

Getting to know the light source hour
When the projector is in operation, the duration (in hours) of light source usage is automatically calculated by the built-in timer.
To obtain the light source hour information:
  • Go to INFORMATION.
  • Go to INSTALLATION > Light Source Settings > Light Source Information
Saving power
  • Setting the Light Source Mode
Go to > INSTALLATION > Light Source Settings > Light Source Mode and press / to select a suitable light source mode from among the provided modes. Setting the projector in Eco/360 & Portrait mode saves power.
  • Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected after a set period of time to save power.
To set Auto Power Off, go to SYSTEM SETUP: BASIC > Auto Power Off and press .

• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to
projection distance.
• The light source brightness will decline over time and may vary within the light source manufacturers specifications. This is normal and expected behavior
 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments