Light source information Getting to know the light source hour LX-MH502Z
Article ID: ART172949 | Date published: 12/28/2018 | Date last updated: 12/28/2018
 

Description

Light source information Getting to know the light source hour  LX-MH502Z

Solution

Getting to know the light source hour
When the projector is in operation, the duration (in hours) of light source usage is automatically calculated by the built-in timer.
To obtain the light source hour information:
  • Go to INFORMATION.
  • Go to INSTALLATION > Light Source Settings > Light Source Information
Saving power
  • Setting the Light Source Mode
Go to > INSTALLATION > Light Source Settings > Light Source Mode and press / to select a suitable light source mode from among the provided modes. Setting the projector in Eco/360 & Portrait mode saves power.
  • Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected after a set period of time to save power.
To set Auto Power Off, go to SYSTEM SETUP: BASIC > Auto Power Off and press .

• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to
projection distance.
• The light source brightness will decline over time and may vary within the light source manufacturers specifications. This is normal and expected behavior