Removing Jammed Paper from Rear Side - TS702

Article ID: ART173091 | Date published: 01/07/2019 | Date last updated: 04/30/2019


Paper Jams


Removing Jammed Paper from Rear Side

Watch the movie


  • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer.
  1. Make sure you have unplugged the power cord.

  2. Rotate printer so that rear side of printer faces toward you.

  3. Detach rear cover.

    Pull out the rear cover.

  4. Slowly pull out paper.


    • Do not touch the inner parts of the printer.

    If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps.

    1. Detach transport unit cover.

      Lift up the transport unit cover and pull out it.

    2. Slowly pull out paper.


      • Do not touch the inner parts of the printer.
    3. Make sure all jammed paper is removed.

    4. Attach transport unit cover.

      Insert the transport unit cover slowly all the way into printer and take down the transport unit cover.

  5. Attach rear cover.

    Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.

    The print data that was sent to the printer is erased. Redo the printing.


    • When reloading the paper, make sure you are using suitable paper and loading it correctly.

If the measures above do not solve the problem, service is required. 

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments