Wireless Network Setup using WPS (WiFi Protected Setup) - TS702

Article ID: ART173130 | Date published: 01/07/2019 | Date last updated: 03/05/2019


LAN setup


Wi-Fi Connection Using WPS

  1. Press the Setup button (A).

    figure: Press the Setup button
  2. Use the Left or Right button (B) to select Wi-Fi setup and press the OK button.

    Setup menu screen: Select Wi-Fi setup
  3. Select WPS (Push button) and press the OK button.

    Wi-Fi setup screen: Select WPS (Push button)
  4. Press and hold the WPS button on the wireless router.

    For more on pressing the WPS button, see the wireless router manual.

  5. Press the OK button on the printer within 2 minutes.

    WPS (Push button) screen: Connect to the wireless router that supports WPS

    If a different screen appears, see "Troubleshooting."

  6. When the screen on the below appears, press the OK button.

    Connected screen

    If a different screen appears, see "Troubleshooting."

  7. Press the Setup button.

    figure: Press the Setup button

    The network connection setup is now complete.

    When connection is complete, Network appears on screen.

  8. Return to the application software and proceed with the installation.


    Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments