Opening the Terminal Cover (SD Card Cover) VIXIA HF W10 _ HF W11
Article ID: ART173331 | Date published: 01/11/2019 | Date last updated: 01/11/2019
 

Description

Opening the Terminal Cover (SD Card Cover)  VIXIA HF W10 _ HF W11

Solution

To open

1 Open the LCD monitor.
2 Slide down the cover lock and slide the cover aside.
3 Lift the cover slowly.

To close
The cover is not properly closed if the red mark
at the terminal cover lock is visible.

Leave the LCD monitor open first.
1 Flip down the cover slowly while making sure the gray waterproof seal fits into the opening at the terminals.
2 Press the entire cover against the camcorder with equal force and firmly attach the cover completely.
3 Slide the cover until it clicks into place. (The cover is not properly closed if the red mark on the cover lock is visible.)

Caution :
  • Ensure that the terminal cover and the gray waterproof seal are not damaged and that there are no foreign materials (such as hair, lint, sand or dust) adhered on the cover.
  • Stop using the unit underwater if there are damages to the cover, etc. and consult your Canon dealer or the nearest Canon service center.
  • Do not apply excessive force when opening/closing the terminal cover.
  • Read the “Cautions on Using Underwater” (A p. 6) before using the camera underwater or in places exposed to water droplets.