Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.
See: “ SEAMLESS RECORDING ”
Depending on the setting of the recording media, recording can be made to the SD card without using the built-in memory.
See: “Types of Usable SD Card” or “Approximate Video Recording Time” for more information
1 Open the terminal cover.
2 Close the LCD monitor to turn off this unit.
3 Insert an SD card.
| Warning |
- Make sure not to insert the SD card in the wrong direction. It may cause damage to the unit and SD card.
- Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.
- Do not touch the metal contact area when inserting the SD card.
|
Memo :
- When “SEAMLESS RECORDING” is set to “ON”, recordings can still be made to the SD card without stopping when the remaining recording time on the built-in memory runs out. See “ SEAMLESS RECORDING ”
- Both videos and still images can be recorded on one SD card. It is recommended to confirm the video operation of the SD card before usage.
- To record to an SD card, it is necessary to set the recording media to See “SD CARD”, “ REC MEDIA FOR VIDEO ”, “ REC MEDIA FOR IMAGE ”
- To use a new SD card, or SD card used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from the “SETUP” menu. See “ FORMAT SD CARD ”
Removing the Card
Push the SD card inward once, then pull it out straight.
