Setting White Balance VIXIA HF W10 _ HF W11

Article ID: ART173398 | Date published: 01/14/2019 | Date last updated: 01/14/2019


Setting White Balance  VIXIA HF W10 _ HF W11


Setting White Balance
You can set the color tone to suit the light source.

1 Select the Manual recording mode.
  • If the mode is Intelligent Auto, tap on the recording screen to display the mode switching screen.
  • Tap to switch the recording mode to Manual.

2 Tap “MENU”.
  • The top menu appears.

  • Tap to exit the menu.
  • Tap to return to the previous screen
5 Select the white balance setting.
  • You can either tap the icon, or select the item using the button and tap “SET”.
  • The White Balance icon appears on the screen upon completing the setting.

Using MWB
1 Point the cursor to “MWB” using the button.
2 Hold a sheet of plain white paper in front of the lens so that the white
paper fills the screen, tap and hold the “SET” button.
3 blinks, release your finger after the setting screen disappears.
  • You can also tap and hold the “MWB” icon to perform the setting.
Memo :
  • The setting will not change if “MWB” is being tapped too fast (less than 1 second).

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments