Ask a Question

Recording at Intervals (TIME-LAPSE RECORDING) VIXIA HF W10 _ HF W11

Article ID: ART173411 | Date published: 01/15/2019 | Date last updated: 01/15/2019
 

Description

Recording at Intervals (TIME-LAPSE RECORDING)  VIXIA HF W10 _ HF W11

Solution

Recording at Intervals (TIME-LAPSE RECORDING)
This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.


1 Open the LCD monitor.
  • Check if the recording mode is
  • If the mode is still image, tap on the recording screen to display the mode switching screen.
  • Tap to switch the mode to video.
2 Tap “MENU”.
  • The top menu appears.
3 Tap “RECORD SETTING”.
  • If the icon is not displayed on the screen, tap > to scroll the screen.
  • Tap to exit the menu.
  • Tap to return to the previous screen.
 

5 Tap to select a recording interval (1 to 80 seconds).
  • If the icon is not displayed on the screen, tap > to scroll the screen.
  • The greater the number of seconds, the longer the recording interval.
  • Tap to exit the menu.
  • Tap to return to the previous screen.
 
6 Start recording.

 
  • A frame is taken at intervals of the selected period. 
  • When the recording interval is set to “20SEC INTERVAL” or higher, this unit switches to the power-saving mode between recordings. At the next point to record, the power-saving mode will be turned off and recording will start automatically.
  • Settings of Time-Lapse recording are not saved when the power is turned off
Indications During Time-Lapse Recording​


Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.


Caution :
  • During the time-lapse recording, video quality is set to XP mode.
  • Audio cannot be recorded during time-lapse recording.
  • When recording is stopped with the recorded time less than “0:00:00:14”,the video will not be saved.
  • Zooming, simultaneous still image recording, and image stabilizer are notavailable in time-lapse recording.
  • Seamless recording is disabled in time-lapse recording.
  • When Time-Lapse recording is set, you cannot record still images.
Memo :
  • Settings of time-lapse recording are reset when the power is turned off.To start time-lapse recording again, it is necessary to make the selection once more.
  • Recording stops automatically 99 hours after it is started.
  • Make use of a tripod and AC adapter for time-lapse recordings with long intervals. It is also recommended to fix the focus and white balance manually.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments