Recording at Intervals (TIME-LAPSE RECORDING) VIXIA HF W10 _ HF W11

 

Description

Recording at Intervals (TIME-LAPSE RECORDING)  VIXIA HF W10 _ HF W11

Solution

Recording at Intervals (TIME-LAPSE RECORDING)
This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.


1 Open the LCD monitor.
  • Check if the recording mode is
  • If the mode is still image, tap on the recording screen to display the mode switching screen.
  • Tap to switch the mode to video.
2 Tap “MENU”.
  • The top menu appears.
3 Tap “RECORD SETTING”.
  • If the icon is not displayed on the screen, tap > to scroll the screen.
  • Tap to exit the menu.
  • Tap to return to the previous screen.
 

5 Tap to select a recording interval (1 to 80 seconds).
  • If the icon is not displayed on the screen, tap > to scroll the screen.
  • The greater the number of seconds, the longer the recording interval.
  • Tap to exit the menu.
  • Tap to return to the previous screen.
 
6 Start recording.

 
  • A frame is taken at intervals of the selected period. 
  • When the recording interval is set to “20SEC INTERVAL” or higher, this unit switches to the power-saving mode between recordings. At the next point to record, the power-saving mode will be turned off and recording will start automatically.
  • Settings of Time-Lapse recording are not saved when the power is turned off
Indications During Time-Lapse Recording​


Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.


Caution :
  • During the time-lapse recording, video quality is set to XP mode.
  • Audio cannot be recorded during time-lapse recording.
  • When recording is stopped with the recorded time less than “0:00:00:14”,the video will not be saved.
  • Zooming, simultaneous still image recording, and image stabilizer are notavailable in time-lapse recording.
  • Seamless recording is disabled in time-lapse recording.
  • When Time-Lapse recording is set, you cannot record still images.
Memo :
  • Settings of time-lapse recording are reset when the power is turned off.To start time-lapse recording again, it is necessary to make the selection once more.
  • Recording stops automatically 99 hours after it is started.
  • Make use of a tripod and AC adapter for time-lapse recordings with long intervals. It is also recommended to fix the focus and white balance manually.

Doc ID   ART173411
Updated   01/15/2019

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments