Using the Self-timer in Still Image Mode VIXIA HF W10 _ HF W11
Article ID: ART173415 | Date published: 01/15/2019 | Date last updated: 01/15/2019


 Using the Self-timer in Still Image Mode  VIXIA HF W10 _ HF W11


Using the Self-timer in Still Image Mode
1 Open the LCD monitor.
  • Check if the recording mode is 
  • If the mode is video, tap on the recording screen to display the
    mode switching screen. Tap  to switch the mode to still image.

2 Tap “MENU”.
  • The top menu appears.


  • If the icon is not displayed on the screen, tap > to scroll the screen.
  • Tap  to exit the menu.
  • Tap  to return to the previous screen.

5 Tap “2SEC” or “10SEC”.


6 Take a still image.

  • A timer appears and countdown to shooting starts.

  • To stop the self-timer, press the START/STOP button again.

Memo :

  • The START/STOP button on this unit cannot be used to adjust the focus in advance. To adjust the focus in advance, press and hold the A button on the touch screen until the focus is adjusted.

“Start recording after adjusting the focus”

  • While the countdown timer is displayed, the buttons cannot be used as they are not displayed on the screen.