Connect Your PIXMA ip110 Printer to a Wireless LAN with a WPS PIN
Article ID: ART173492 | Date published: 01/18/2019 | Date last updated: 07/22/2021
 

Description

Learn how to use a WPS PIN Code to connect your PIXMA ip110 printer to your wireless network.

Solution

To connect your PIXMA iP110 to a wireless router using a WPS PIN code, follow these steps.


Wireless Instructions

  1. Load a sheet of A4 or Letter-sized plain paper.

  2. Hold down the Resume/Cancel button (A) on the printer until the Power lamp (B) flashes 6 times, then release the button. 

     The Network Configuration Page will be printed, which contains the WPS® PIN Code. You'll find an example of this page at the bottom of the article.


     

  3. Hold down the Resume/Cancel button on the printer until the Power lamp flashes 8 times, then release the button. 



     

  4. Follow the on-screen instructions on your device to enter the WPS PIN code you see on the Network Configuration Page to the access point.

  5. Make sure the Wi-Fi lamp (C) on the printer is lit.




     

Attachment

iP110_NW_Settings.pdf
76K • < 1 minute @ 56k, < 1 minute @ broadband