Connecting Your Printer to a Wireless LAN (WPS PIN Code) - MB2120



This article shows how to start a wireless connection of your MAXIFY MB2120 printer to a wireless LAN using the WPS PIN code method.



Some wireless routers will allow you to connect devices via a WPS PIN code.  Follow the steps below to begin a wireless connection setup using the WPS PIN code method for the MAXIFY MB2120.
  1. On the HOME screen, use the arrows to select LAN settings and press the OK button.

  2. On the LAN settings screen, select Wireless LAN setup and press the OK button.

  3. Select Other setup and press the OK button.

  4. Select WPS (PIN code method) and press the OK button.

    A PIN code will appear on the screen.

    The PIN code must be entered into your router.  Please refer to your router's documentation for information on how to enter a PIN code from a device.

    After the PIN code has been entered into the router, the printer will attempt to connect to the network.

  5. After the printer has connected, press the OK button.

MB2120 Page


Doc ID   ART173495
Updated   04/25/2019

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments